Ford Performance Parts M-6007-Z460FFT - Boss Crate Engine; 460 cu. in.; 575 HP at 5500 RPM; 575 lb.-ft. Torque at 4700 RPM; w/Front Sump; 4.150 in. Bore x 4.250 in. Bore;

Ford Performance has taken its Boss Block to the max with the biggest small block Windsor crate engine ever - the Z460. With 575 horsepower and 575 Lb. Ft. of torque, Z460 packs a pump gas fueled punch that works well on the street and on the track. The foundation of Z460 is the legendary Ford Performance Boss block topped off with high port/high flow Z-Heads. Premium components from the best aftermarket companies are used throughout the engine, like a SCAT(R) forged steel crankshaft, SCAT(R) forged H-beam connecting rods, forged Mahle(R) pistons and Clevite(R) bearings. And every Ford Performance Z460 engine is hand assembled in the U.S. with performance clearances. Oil Pan: Steel with deep front (9 quart) or rear sump (7 quart) pan with louvered windage tray and crankshaft scraper - 9 quart capacity -M-6675-FT351 front sump; Water pump: Ford Performance M-8501-G351 included long type - standard rotation; Includes Ford Performance M-9439-A50 intake manifold gaskets; Distributor: not included. Steel distributor gear required; Required fuel: Premium Unleaded; Ignition timing: 32° at 4,000 RPM; Maximum recommended rpm: 5,600 RPM; Balanced: Internal use neutral balance flywheel; Recommended intake: Edelbrock PN 2924 Super Victor (not included); New block, oil and water pump, performance oil pan and high-performance harmonic balancer; Engine power ratings achieved with Edelbrock(R) Super Victor intake, Holley(R) 850 CFM carburetor, long tube headers.

Features

• Engine Type 351 Based Small Block Ford; 460 cu. in. Displacement
• Boss 351 Block w/9.5 in. Deck
• SCAT® Forged Steel Crankshaft
• SCAT® Forged Steel H-Beam w/6.125 in. Conn. Rods w/Floating Pins
• Forged Mahle® Pistons w/Floating Wrist Pins
• Hydraulic Roller Camshaft w/0.594/0.618 in. Lift
• Ford Performance M-6049-Z304DA Aluminum Z Cylinder Heads
• Compression Ratio: 10.0:1 (Nominal)
• Rocker Arm Ratio: 1.65:1
• Vibration Damper- Ford Performance M-6316-D302 SFI Approved
• Valve Covers: Ford Performance 302-137 Cast Aluminum Gray Crinkle