The direct-injected and turbocharged 2.0L Hurricane engine found in the 2018-2023 Jeep Wrangler JL is the most advanced engine ever fitted to a Wrangler. But, despite all the high-tech features that make the Hurricane great, It's still vulnerable to a very low-tech problem: blow-by. The fuel efficiency and increased power of direct injection comes with the threat of carbon buildup. As fuel and air get squeezed in the cylinder, some of the mixture leaks past the piston rings and carries oil from the cylinder walls with it. This mixture is known as blow-by. To prevent crankcase pressure from building up, the blow-by is then vented into the intake to be reburned. Blow-by becomes an issue with direct-injected engines when it passes the intake valves. Without fuel spraying over the valve, There's nothing to wash off the blow-by and heat from combustion eventually causes it to build up as carbon on the back of the intake valves. That carbon buildup prevents valves from closing fully and disrupts airflow. The result is poor running, misfires and, if left long enough, engine damage. The best solution to the problem of blow-by buildup is prevention. Instead of letting blow-by enter the intake, the Mishimoto 2018-2023 Jeep Wrangler JL 2.0L direct-fit baffled oil catch can kit diverts it away from the intake valves and into a 7.5 oz catch can. You can then recycle the contents of the catch can with your next oil change. The internal air diverters and baffle of our catch can thoroughly condense oil, fuel, and water vapor so that the only air flowing through your intake is fresh air. In addition, our direct-fit lines and high-flow filter ensure CEL-free running. Like all Mishimoto products, this 2018-2023 Jeep Wrangler JL 2.0L catch can kit is protected by our Mishimoto Lifetime Warranty, so your JL can also be protected from blow-by for a lifetime. Baffled Oil Catch Can, fits Jeep Wrangler JL 2.0L 2018-2023